My Cart

0 item(s) - $0.00

PV Powered 260kW Photovoltaic Inverter Solar Power PVP260kW Generator Energy NEW

PV Powered 260kW Photovoltaic Inverter Solar Power PVP260kW Generator Energy NEW

Quick Overview

PV Powered Utility Interactive Three Phase Photovoltaic Inverter

Availability: In stock

$39,500.00
OR

Details

PV Powered PVP260kW Solar Inverter
This unit was built in 2010
Serial Number: PV2600BBAF0210100087
Model: PVP-260kW
Operating Voltage: 480

Contents:
-Operating & Installation Manual
-Warranty Registration Card (It is up to you to see if you can still get a warranty. It is only 5yrs old and the warranty is good for 10 years with an option warranty for 20yrs.)
-IEE 1547 Production Line Test Data Sheet (All Passed)
-Spare GFDI Fuse
-Keys Included

This unit came out of a solar farm that was closing down. The year it was made was in 2010. Unit is still packed on its original pallet. It was never been used or hooked up. There is some very slight paint peeling on the edges (See Photos), but inside and out it is in complete unused condition (SEE PHOTOS). Manual, Software Disk, Keys, Warranty Card, Production Data Test Sheet from the factory (all passed), Fuse & other paperwork.

We have seen this unit currently selling on the internet for $99,000.00, $96,000 & $93,000.00.

Label on the Unit Reads:
Utility Interactive Three Phase Photovoltaic Inverter
Rated Output Power: 260,000W
AC Operation (V):
Nom. voltage: 480
Min. voltage: 423
Max. voltage: 528
AC Operation (A):
Max. Current: 316
Max. branch ciruit: 400
AC Operation Frequency: 60 Hz
AC Frequency Range: 59.3-60.5 Hz
Power Factor Range: 0.95-1.0
Enclosure Type: 4 outdoor use
S/N: PV2600BBAF0210100087*
DC Max. Voltage: 600 VDC
DC Operating Limits: 295-500 VDC
DC Maximum Current: 1030 A
DC max. short circuit current: 1600 A
Operating Temp. Range: -30 to 50C
AC Voltage Accuracy:
Low: +/- 5% <2 seconds
High: +/- 5% < second

AC Frequency Trip Points (Hz):
Low: 59.3 +/-0.1Hz <160mS
High: 60.5 +/-0.1Hz <160mS

Conforms to UL Std 1741, Revision 11/07/05.

 

The section below was taken off the internet:

PV Powered Utility Interactive Three Phase Photovoltaic Inverter

 

PVP260kW Inverter Features

Superior Reliability

  • Redundant cooling system with Smart Air Management™
  • Low parts count reduces potential failure points
  • Engineered busbar power connections
  • Card cage circuit board system minimizes electronic interconnections

Exceptional Install ability

  • Top, bottom and side entry with generous bending area and oversized busbar landings
  • Large DC sub-combiner compartment with multiple fuse options
  • Full power output at 265 VDC enables more PV array design options
  • Exterior mounting flanges for fast and easy anchoring with no pre-drilling

PV Powered 260kW

The industry standard for reliability, install ability and maintainability

PVP 260kW 
Continuous Power: 260kW
DC Operating Range: 295-500V
CEC Weighted Efficiency: 97%

The PV Powered 260kW has raised the bar once again for commercial inverter reliability, ease of installation and lifetime maintainability.

High reliability is enabled by market-leading features including:

  • busbar power connections
  • redundant cooling system
  • card cage circuit board design
  • the widest temperature rating of any inverter in its class

The highly integrated system saves installers time and money by including load rated AC & DC service disconnects, neutral-free installation, oversized busbar landings and generous cable bending area for top, bottom and side cable entry options.

The PVP260kW has a standard 295VDC minimum MPPT and an optional full power 265VDC minimum MPPT- the lowest MPPT voltage of any commercial inverter in the industry. This low input voltage option enables exceptional stringing capability with all PV module technologies including new thin film modules.

The PVP260kW also simplifies performance monitoring by offering inverter-integrated solutions from market leaders Fat Spaniel, Draker and Energy Recommerce. Additional options from PV Powered include integrated revenue grade meter and subcombiner monitoring. 

NOTE: The above in information was taken off the internet. The information above is for you to get a general idea of the machine. It is up to you to know the information is correct.

Bertolino Industries item Number: 1015-1099 / 09092014-1

 

 

This unit is F.O.B. Chatsworth, CA 91311.

NOTE:
There is a $200.00 handling fee. 
If the unit is crated, it will not fit into an enclosed trailer. Right now, it will fit with 1" to spare.
Crating Fee: $950.00 (includes the handling fee)

 

Inspections are encouraged. If you have any, please feel free to contact us.

 

Payment: Bank Wire Transfer. Before the item leaves our facility, payment must clear prior.

 

Additional Information

Manufacturer N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.